Getting ready to close or winterize your pool? Swim University has got you covered with their informative video on avoiding common pool closing mistakes. In the video, they highlight seven common errors that pool owners often make, such as closing the pool too early, draining it completely, and using antifreeze incorrectly. They also provide helpful tips and advice on how to avoid these mistakes, such as checking the pool water temperature before closing, properly winterizing the lines, and using water tubes or cover weights instead of bricks or stones. By following these recommendations, you can save time and prevent any headaches when it’s time to reopen your pool in the spring. If you want to ensure a smooth pool closing process, Swim University’s video is a must-watch!
If you’re getting ready to close or winterize your pool, you may have some common questions and concerns. Swim University’s video on “Avoid These Common Pool Closing Mistakes” provides the answers you need. They discuss seven mistakes that pool owners often make, including closing the pool too early, draining it completely, and using antifreeze improperly. To help you avoid these errors, they offer valuable tips, such as checking the pool water temperature before closing, properly winterizing the lines, and using water tubes or cover weights instead of bricks or stones. By following their advice, you can save time and prevent any problems when it’s time to reopen your pool in the spring. So, if you want to make sure your pool closing process goes smoothly, be sure to watch Swim University’s informative video.
Table of Contents
ToggleCommon Pool Closing Mistakes
Closing the pool too early
Closing your pool too early can lead to problems such as algae growth and chemical imbalances. It is important to wait until the pool water temperature drops below 60 degrees Fahrenheit or 16 degrees Celsius before closing your pool. This ensures that algae has a harder time growing and that any chemicals added to the water will last through the winter. If you live in a climate with temperatures above 60 degrees Fahrenheit in the winter, it is recommended to check your water chemistry every two to three weeks to prevent algae growth.
Lee's Summit Local SponsorsDraining the pool completely
Draining the pool completely can cause serious damage to the vinyl liner or concrete foundation of an in-ground or permanent above-ground pool. The water in the pool helps to keep the ground from shifting or freezing. Instead of draining the pool, it is important to clear the water out of the lines, pipes, and equipment while still leaving water in the body of the pool. This can be done by blowing out or winterizing the lines using an air compressor.
For above-ground pools, the water level should be lowered below the skimmer and return lines if you are concerned about freezing and cracking. However, draining the water can cause pressure on the pool cover when it collects rainwater or snow, so it is important to regularly drain the water off the cover throughout the winter. Another option is to use a winter skimmer plate, which allows you to keep the water level at its normal level and is better for your winter cover. The exact level to drain the water in in-ground pools depends on the type of pool cover and the pool surface. Vinyl liners should have the water level one inch below the skimmer opening or tile line, while plaster or non-vinyl pool liners with a solid winter cover should have the water level six inches below the skimmer or tile line. Mesh covers require the water level to be lowered 18 to 24 inches below the skimmer or tile line.
Lee's Summit Local SponsorsSmaller inflatable pools, such as Intex pools, should be completely drained and dismantled if the temperature drops to 41 degrees Fahrenheit or below to prevent ice damage.
Using antifreeze instead of proper winterization
Using antifreeze as a substitute for properly winterizing your pool’s lines is a common mistake. While antifreeze can help prevent water from freezing and expanding, it is important to remove all the water from the lines by blowing them out with an air compressor. Antifreeze should be seen as an insurance policy rather than a replacement for proper winterization. If you do choose to use antifreeze, be sure to choose a non-toxic antifreeze that is rated to the appropriate temperature for your winter climate.
For above-ground pools, antifreeze is not necessary as the risk of ice damage is primarily to the pool walls. Using an air pillow can help protect the walls in these cases. In warm climates, freeze prevention measures may not be needed, but it is still important to keep the pool pump hooked up and running daily throughout the winter.
Storing pool gear in the wrong place
Storing pool gear in the wrong place can lead to damage and make it difficult to find everything when you reopen your pool in the spring. It is recommended to store all small pool parts, such as drain plugs, fittings, and O-rings, in your pump strainer basket. This ensures that they are easily accessible and won’t get misplaced. Metal equipment should be stored indoors to protect it from damage, cracks, and rust. It is also important to keep any metal away from chlorine, as it can cause rusting. If possible, it is best to leave your pump outside and winterize the equipment to prevent damage, unless you live in an area with heavy snowfall or harsh winter conditions.
Not cleaning the pool before closing
Cleaning your pool before closing is essential to prevent the buildup of dirt, debris, and algae. Just as you wouldn’t put a dirty coffee cup away, it is important to vacuum, brush down the walls, and skim the surface of your pool before closing it for the year. It is also important to clean your filter by backwashing, cleaning, and draining the water out of it. Taking the time to clean your pool before closing will save you from potentially nasty surprises when you open your pool in the spring.
Not balancing the water before closing
Balancing the water before closing your pool is important for maintaining the longevity of your pool liner and equipment, as well as preventing algae growth. It is recommended to test and balance the alkalinity, pH, and calcium hardness levels before closing your pool. Additionally, it is important to shock your pool with a fast-dissolving shock before putting the cover on. This helps to maintain the free chlorine level between 3 and 5 parts per million during the off-season. If you live in a warmer climate, it is important to test your water chemistry every few weeks to prevent algae growth. Adding an algaecide to your pool just before closing can also be beneficial, but be sure to give the shock enough time to dissolve before closing the pool.
Using bricks or stones to hold down the winter cover
Using bricks or stones to hold down the winter cover is not recommended as they can damage the pool liner if they fall into the pool. It is better to use water tubes or water cover weights to keep the cover from sinking into the pool over the winter. These will also prevent any gaps along the edges of the pool. For above-ground pools, the cover should be secured with a cable and winch or a combination of winter cover clips and a cable. For in-ground pools, a pool safety cover can be considered to help keep anything from falling into the water.
Tips to Avoid Mistakes
Check the pool water temperature before closing
Before closing your pool for the winter, it is important to check the pool water temperature. Waiting until the temperature drops below 60 degrees Fahrenheit or 16 degrees Celsius ensures that algae growth is minimized and any chemicals added to the water will last through the winter. If you live in a climate with warmer temperatures in the winter, it is recommended to check your water chemistry every two to three weeks or until the water freezes. This will help you maintain a balanced and healthy pool during the off-season.
Winterize the lines properly
Properly winterizing the lines is crucial in preventing damage to your pool’s plumbing and equipment. This involves blowing out or winterizing the lines using an air compressor to remove all the water. Antifreeze can be used as an additional precaution, but it should not replace the proper winterization process. For above-ground pools, the water level should be lowered below the skimmer and return lines if there is a risk of freezing and cracking. Using a winter skimmer plate can also help maintain the normal water level and protect the pool cover. In-ground pools have specific water level requirements depending on the type of pool cover and the pool surface. By properly winterizing the lines, you can prevent costly repairs and ensure a smooth pool reopening in the spring.
Store pool gear strategically
Storing pool gear in a strategic place helps protect it from harsh weather conditions and makes it easier to find when you reopen your pool. All small pool parts, such as drain plugs, fittings, and O-rings, should be stored in your pump strainer basket. This ensures that they are easily accessible and won’t get misplaced. Metal equipment should be stored indoors to protect it from damage, cracks, and rust. Keeping the pump outside and winterizing the equipment is recommended unless you live in an area with heavy snowfall or harsh winter conditions. By storing your pool gear properly, you can prolong its lifespan and ensure that everything is in good condition when you need it.
Clean the pool thoroughly before closing
Cleaning your pool thoroughly before closing is important to prevent the buildup of dirt, debris, and algae. Vacuuming, brushing down the walls, and skimming the surface of your pool will remove any contaminants and ensure that the water is clean. It is also crucial to clean your filter by backwashing, cleaning, and draining the water out of it. This helps maintain the efficiency of the filter and prevents any clogs or blockages. Taking the time to clean your pool before closing will save you from potential issues when you reopen your pool in the spring.
Balance the water and use shock and algaecide
Balancing the water and using shock and algaecide before closing your pool helps maintain its longevity and cleanliness during the off-season. It is important to test and balance the alkalinity, pH, and calcium hardness levels before closing your pool. This will prevent any imbalances that could cause damage to the pool liner and equipment. Shocking the pool with a fast-dissolving shock before closing helps maintain the free chlorine level between 3 and 5 parts per million. Adding an algaecide just before closing can further prevent algae growth during the winter months. By ensuring that the water is properly balanced and treated, you can enjoy a clean and healthy pool when you reopen it in the spring.
Use water tubes or cover weights instead of bricks or stones to hold down the cover
Using water tubes or cover weights instead of bricks or stones is recommended to hold down the cover and prevent damage to the pool liner. Water tubes and cover weights are specifically designed for this purpose and are less likely to fall into the pool. They also prevent any gaps along the edges of the pool, ensuring that the cover remains secure throughout the winter. For above-ground pools, the cover should be secured with a cable and winch or a combination of winter cover clips and a cable. For in-ground pools, a pool safety cover can be considered for added protection. By using the appropriate methods to hold down the cover, you can avoid potential damage and ensure that your pool is well-protected during the winter season.
Benefits of Proper Pool Closing
Saves time when reopening in the spring
Properly closing and winterizing your pool can save you valuable time when it comes to reopening in the spring. By avoiding common mistakes and following the recommended tips and guidelines, you can prevent the need for extensive cleaning, repairs, and adjustments before opening your pool. This means less time spent on maintenance and more time enjoying your pool once the warmer weather arrives.
Prevents headaches and costly repairs
Taking the time to properly close and winterize your pool can prevent headaches and costly repairs down the line. By avoiding mistakes such as closing the pool too early, draining it completely, or using improper winterization methods, you can avoid potential damage to your pool liner, plumbing, and equipment. This can save you from the stress and expense of repairing or replacing these components in the future.
Maintains the pool’s longevity
Proper pool closing and winterization practices help maintain the longevity of your pool. By addressing any imbalances in the water, cleaning the pool thoroughly, and protecting it from harsh weather conditions, you can prolong the lifespan of your pool and its components. This means fewer repairs and replacements over time, allowing you to enjoy your pool for many years to come.
Promotes clean and healthy water
Closing and winterizing your pool properly ensures that the water remains clean and healthy during the off-season. By balancing the water, using shock and algaecide, and preventing the growth of algae and bacteria, you can prevent any issues that may arise from stagnant or untreated water. This means that when you reopen your pool in the spring, you can enjoy clean and clear water without the need for extensive cleaning or treatments.
By avoiding common pool closing mistakes and following the recommended tips, you can ensure that your pool is properly prepared for the winter season. Taking the time to check the water temperature, winterize the lines, store pool gear strategically, clean the pool thoroughly, balance the water, and use the appropriate cover weights will save you time, prevent headaches and costly repairs, maintain your pool’s longevity, and promote clean and healthy water. Proper pool closing and winterization practices are essential in protecting your investment and ensuring many years of enjoyment in your pool.
Scroll to Top